Serves the Commercial Small Fleet Market of 10 – 50 Vehicles

Market Trends

Public Sector Fleet ManagementVehicle Overloading Is Expensive & Dangerous

June 21, 2005, by Mike Antich

A Safety Issue
One of the best ways to determine whether vehicles are being overloaded is during PM intervals. There are several way to determine overloading: a sagging rear end, irregular tire wear, premature brake wear, and loose unresponsive suspension and steering. You should also take the opportunity to walk around your fleet operation and assess actual vehicle usage. Overloading is dangerous because it creates an unsafe vehicle and increases liability exposure in the event of an accident. Consider the following:
  • Emergency handling capability of an overloaded vehicle is drastically reduced, which may result in an accident.
  • Braking distance increases significantly, which can cause drivers to misjudge stopping distances.
  • Tire failure rates are higher, because tires run hotter.Ways to Avoid Overloading
    There are five steps you can take to avoid overloading: 1. Avoid Modifying Vehicles.
    It is advisable to avoid modifying a vehicle to accommodate a heavier payload, such as changing tire sizes, adding spring kits, air shocks, heavy-duty brakes, and anti-sway kits. When you modify a vehicle, you creat an unsafe situation by changing the integrity of the vehicle. In addition, this may affect the new-vehicle warranty and increase liability exposure if there is an accident. 2. Install Weight Meters.
    A weight meter will automatically determine payload weight and help to minimize unintentional overloading.3. Select a Different Vehicle.
    You may not need a larger vehicle to carry the desired payload, just a different vehicle. A cargo van may not be best for your needs: you might do better with a pickup truck with a topper combination and pull-out shelving system, which can haul more weight. 4. Don’t Carry Unnecessary Items.
    One way to avoid overloading a vehicle is to eliminate unnecessary equipment or shelving. Modify storage bin units to fit your needs. Clean out the unnecessary items. Carry only those items that you know you will need. If given an opportunity, drivers will carry everything they can conceivably fit into a vehicle. 5. Train Drivers on Proper Load Distribution.
    Design loading areas in a vehicle that force workers to position cargo and material correctly. It is important to train drivers on proper loading techniques, such as balancing the load, so that drivers don’t create an unsafe driving situation. The Bottom Line
    The bottom line is that overloading is not only expensive from the standpoint of maintenance, it also increases fuel consumption, which adds to a vehicle’s operating expense. Let me know what you think.[email protected]
  • Comment On This Story

    Email: (Email will not be displayed.)  
    Comment: (Maximum 10000 characters)  
    Leave this field empty:
    * Please note that comments may be moderated.

    Fleet Incentives

    Determine the actual cost of owning and running a vehicle in your fleet. Compare vehicles by class and model.


    Fuel Management

    Bernie Kanavagh from WEX will answer your questions and challenges

    View All


    Fleet Tracking And Telematics

    Todd Ewing from Verizon Connect will answer your questions and challenges

    View All


    Fleet Management And Leasing

    Jack Firriolo from Merchants will answer your questions and challenges

    View All


    Sponsored by

    Jacobs first named his company Rent-a-Ford, but then changed it to Rent-a-Car, and finally to the Yellow Driv-ur-self System. In 1923, Jacobs sold his company to John Hertz and was hired as Hertz's top operating and administrative executive.

    Read more

    Author Bio

    Mike Antich

    sponsored by

    Editor and Associate Publisher

    Mike Antich has covered fleet management and remarketing for more than 20 years and was inducted in the Fleet Hall of Fame in 2010.

    » More

    More From The World's Largest Fleet Publisher