Tires are a major expense for truck fleets. Replacement tires are often the second-highest expense after fuel. But there are strategies to make tires last longer, reducing the expense to replace them.
Adopting retreads is one way to reduce that expense, because it allows a casing to be retreaded multiple times, maximizing the productivity of one casing. But that’s only half of the job.
Fleets must also consider how they use and maintain these retreads to ensure they last.
There are several benefits to using retreads. For one, tire makers are working on designing retreads with no discernable difference from new tires. On the user end, fleet drivers should not perceive any difference from a new tire.
David Stevens, managing director, Tire Retread & Repair Information Bureau (TRIB), noted that a retread tire could cost 30% to 50% less than a quality new tire. And, it can be retreaded several times, offering further savings.
“Once you combine the cost savings with multiple retreads of the same tire, you are easily delivering the lowest total cost of ownership for tires and creating the greatest return on your fleet’s tire investment,” Stevens explained.
Cost has always been considered a benefit of retread tires. But with the influx of lower-cost import tires available, fleets should remember the additional benefits of retreads, including performance.
“In many instances, low-priced imports have a lower quality than a retreaded tire from a reputable source. And the new treads from a low-priced import may wear more quickly, and the resultant casing from the import tire may not have the same quality as that from a major brand,” said Glenn Stockstill, product category manager, retread, Michelin B2B.
Stevens noted retread tires reduce the usage of natural rubber, oil, steel, and other materials and helps keep millions of tires out of a landfill.
What to Look for in a Retread
There are two primary elements to consider when selecting the right retread: the casing and the tread.
“The casing should be inspected and evaluated for damage or defects to make sure it can handle a retread. It is also important to make sure the retread width fits the casing accurately,” explained Dustin Lancy, commercial product marketing manager - regional/urgan for The Goodyear Tire & Rubber Company.
The right tread depends on a variety of factors, including trade cycle, vehicle type and configuration, average casing age in the fleet, load type, and length of haul, according to Stockstill. And based on these needs, the right tread may not be the one that comes with your truck.
“Don’t assume that the original equipment (OE) tire tread that came with your vehicle is optimal for your business’ conditions,” Stockstill warned. “Select a tread that is best suited for your application needs while also offering good performance and durability.”
When the casing and tread are combined, the retread should fit the job and the environment.
“Select the right tire (or retread) for the application, considering the proper tire size, load-carrying capacity, speed capability, and service type,” said LaTres Jarrett, director of marketing, Bandag, U.S. and Canada, Bridgestone Americas Tire Operations.
Use Under the Right Conditions
Regardless of tire you’re working with, the most important factor for maintenance is air pressure.
“Whether it is a new tire or a retread, the key to maximizing the life of a tire is to always run the tire at the manufacturer’s recommended pressure for the application it is in,” said John Barnes, head of ContiLifeCycle for the Americas, Continental.
But maintaining proper air pressure is especially important for retreads since retreads have a much longer expected life cycle.
“Maintaining proper air pressure will help reduce irregular wear and extend tread life, giving fleets more value out of their tire. It also helps protect the tire casing, which is essential for getting the maximum number of retreads,” said Barnes.
The ideal air pressure can vary, depending on the loads carried and manufacturer recommendations. Stockstill said to know the maximum load a fleet vehicle may carry under day-to-day operations, and consult tire manufacturers’ load and inflation charts.
Jarrett also warned against exceeding the maximum recommended speed of the tire, which may be lower than posted highway speed limits.
Air pressure should be checked regularly.
“Fleets should perform daily pressure checks on tires. Air loss is the number one cause for over-the-road failures both in new and retread tires,” Lancy explained.
Air pressure is only part of a tire management program. But the experts agree that it is the most important part of tire maintenance.
“Of course, fleets should have robust tire management and maintenance programs to ensure they get the best performance out of their tires, but nothing has more of an impact than keeping the tire inflated properly in the first place,” Stevens explained.
Stevens pointed to tire pressure monitoring systems (TPMS) and automated tire inflation systems to help maintain tires. He also recommended throwing out tire thumpers, relying instead on properly calibrated tire gauges.
Establish a Maintenance Policy
To ensure the productivity of a retread is maximized, fleets should maintain a written maintenance policy.
“This policy should be specific to their vehicles, equipment, geography, distance they travel, loads they carry, time on the road, and other pertinent factors. It should also cover the specifics of replacement treads entering their fleet as per the retreading policy. A part of this maintenance policy should include scrap analysis,” Stockstill said. “The key to a good maintenance program is that everyone has ‘skin in the game.’ All maintenance technicians, drivers, and managers know and understand what the fleets tire parameters are and what is ‘out of tolerance.’ ”
In addition to regular maintenance, Jarrett recommends conducting pre- and post-trip inspections as well as regular yard checks.
“Inspect tires for road-related damage such as cuts, cracks, bulges, and penetrations,” Jarrett said.
Working with a dealer partner can make tire management easier. Jarrett noted that some dealers have the capability to monitor and record retread performance, repair history, inventory, and casing rejection information in real-time.
Know When to Retread
An important factor in working with retreads: knowing when to pull it from service for retreading.
“The tire must be pulled out of service when it reaches 4/32 inches of tread depth for steer tires and 2/32 inches for drive and trailer tires. This ensures that there is still rubber above the belts of the casing. If the tire is run below this depth, damage to the tire integrity can occur, making the tire non-retreadable,” Barnes said.
Also, fleets should establish a tire replacement policy. The policy should cover the casings, number of times a quality casing will be retreaded based on the vehicle usage, casing age and condition, tire position, type, and quality of the new retreads.
Fleets should predetermine their pull point for the tire, based on the application. Many fleets pull the tire for retreading when the tread is 4/32 or 5/32.
“The pull point should maximize the number of retreads per casing and include an age of service limitation for the first, second, and third, etc., life of the retreads and their position. Some urban or severe-service fleets (such as sanitation fleets) can retread six or seven times on a quality casing,” Stockstill said.
Any tire coming out of service should be evaluated for damage and documented. This evaluation will help the fleet determine the best future selections for the application for the best overall value.
Originally posted on Work Truck Online