Safety Tip: Proper Steering Grips
Here's steering advice from AAA, the California DMV and the National Highway Traffic Safety Administration.

Photo: AAA
Even an All-Star shortstop can fumble a routine ground ball if he’s not in the ready position when the ball is hit. Similarly, even the most skilled drivers can fail to avert a crash — one that should be avoidable — if their hands aren’t in the ready position and properly gripping the steering wheel. When trying to avoid a collision, every fraction of a second counts.
“Recommendations for steering control and hand positions differ from vehicle to vehicle based on the size, age, speed, and responsiveness of the vehicle,” the California Department of Motor Vehicles notes in the agency’s driver’s manual. That said, there are some general guidelines for late-model passenger cars and pickup trucks.
If you think of the steering wheel as the face of a clock, place your hands at 9 and 3 o’clock, or slightly lower at 8 and 4 o’clock. To reduce face, arm and hand injuries in the case of a deployed air bag, you should grip the outside of the steering wheel, with your knuckles on the outside of the wheel and your thumbs stretched along the rim, according to the California DMV.
Here's advice on three common steering methods:
Hand-to-Hand Steering — This steering method may also be called push/pull steering. Using this steering method, your hands do not cross over the face of the steering wheel, and therefore there’s less chance of injury to your face, arms, or hands in the event of an air bag deploying. When using this method, start with your hands at 9 and 3 o’clock, or slightly lower at 8 and 4 o’clock. Depending on the direction you’re turning, one hand will push the wheel up, and the opposite hand pulls down.
Hand-over-Hand Steering — This method of steering can be used when turning at low speeds, when parking, or when recovering from a skid. When using this method, start with your hands at 9 and 3 o’clock, or slightly lower at 8 and 4 o’clock. Depending on the direction you’re turning, one hand will push the wheel up, while the other hand will let go, reach across the other arm, grasp the wheel and pull up.
One-Hand Steering — NHTSA recommends using one hand steering only when turning while backing, or when operating vehicle controls that require removing a hand from the steering wheel. The only time that a 12 o’clock hand position is recommended is when backing a vehicle while turning, since the driver must turn in his or her seat to see the path of the vehicle. The placement of hands at 9 and 3 o’clock, or slightly lower at 8 and 4 o’clock, on the wheel is critical to vehicle balance.
Originally posted on Automotive Fleet
More Safety

Farmers Insurance Expands Red Cross Support With Disaster Relief Investment
Farmers Insurance joined the Red Cross Disaster Responder Program with a $250,000 contribution supporting disaster recovery efforts nationwide.
Read More →
Netradyne Delivers 66% Reduction in At-Fault Crashes Across Domino's Franchise Network
Five Domino's franchises and more than 1,000 vehicles are now running on Netradyne's AI-powered fleet safety and performance platform. Designed for fleets that use personal or non-owned vehicles, FlexMount allows drivers to quickly install and remove Driver-i.
Read More →
Your Suppliers Are Part of Your Disaster Plan
Your suppliers can make or break disaster response. Here’s how fleets can reduce vendor risk and keep critical parts flowing when storms hit.
Read More →
How Federal Disaster Declarations Work and Why Fleet Leaders Need to Know
How federal disaster declarations work and why fleet leaders should care about funding, reimbursements, infrastructure repairs, and recovery timelines.
Read More →
Safety Is Usually the First Priority… Until the Day Gets Busy
Small fleets can improve safety without big budgets by building simple routines, spotting blind spots early, and creating habits that stick.
Read More →
What Wheels Are Actually Doing at 60 MPH | Fleet Vehicle Science Explained
Tire Science for Fleets: Neil deGrasse Tyson breaks down why the tire contact patch hits 0 mph and what that means for traction and wear.
Read More →
Five Ways Seat Belts Help Prevent Injuries
There are five ways seat belts protect occupants from injuries, according to the Tennessee Department of Safety and Homeland Security.
Read More →
How RoadEazy Is Rethinking Fleet Tech for Smaller Operations
Small and midsize fleets deserve better telematics. RoadEazy’s Todd Palumbo explains how simpler tech and local partners are changing the game.
Read More →
Tips for Driving Safely on Halloween Night
This video features a reminder from the Connecticut Department of Transportation (DOT) and the Connecticut Police Chiefs Association, urging drivers to prioritize safety this Halloween.
Read More →
Hot Weather Driving Tips for Fleet Drivers
As we head into another potentially extreme summer season, the risks for fleet drivers remain high, from engine strain and tire blowouts to unpredictable traffic patterns. An expert shares advice on how fleet drivers can boost their safety during the steamy summer months.
Read More →